Cable management products, pipe support systems & fixings     Tel: 020 7537 6500     Fax: 020 7537 6501     Email: [email protected]

Total Number of Products: 154

Erico 4H24 Range

A knock-on girder clip incorporating a 7mm hole.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
4H24CADDY CLIP 4H24.
Flange 3 - 8mm
68.4910020.0054.79
4H58CADDY CLIP 4H58
Flange 8 - 14mm
74.5710020.0059.66
4H912CADDY CLIP 4H912
Flange 14 - 20mm
77.6210020.0062.10

Erico 4H24CT Range

This clip is the ame as the 4H24 with a cable tie holder added. Max cable tie width 7.6mm. Please order cable ties separately.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
4H24CTCADDY CLIP 4H24CT
Flange 3 - 8mm
144.5610020.00115.65
4H58CTCADDY CLIP 4H58CT
Flange 8 - 14mm
152.1610020.00121.73
4H912CTCADDY CLIP 4H912CT
Flange 14 - 20mm
164.3310020.00131.46

Erico 4H24ST3 Range

This clip is the same as the 4H24 range with a 70mm flexible strip added to hold back groups of cables.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
4H24ST3CADDY CLIP 4H24 ST3
Flange 3 - 8mm
171.9410020.00137.55
4H58ST3CADDY CLIP 4H58 ST3
Flange 8 - 14mm
178.0310020.00142.42
4H912ST3CADDY CLIP 4H912 ST3
Flange 14 - 20mm
181.0810020.00144.86

Erico M6TI24 Range

A knock-on clip for securing threaded rod to horizontal flanges. This clip is availble with a thread impression, or just a 10.5mm clearance hole.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
M10TI24CADDY CLIP M10TI24
Flange 3 - 8mm / Studding M10
221.1010020.00176.88
M10TI58CADDY CLIP M10TI58
Flange 8 - 14mm / Studding M10
166.9310020.00133.54
M10TI912CADDY CLIP M10TI912
Flange 14 - 20mm / Studding M10
174.3010020.00139.44
M6TI24CADDY CLIP M6TI24
Flange 3 - 8mm / Studding M6
164.3310020.00131.46
M6TI58CADDY CLIP M6TI58
Flange 8 - 14mm / Studding M6
161.2810020.00129.02
M6TI912CADDY CLIP M6TI 912
Flange 14 - 20mm / Studding M6
178.0310020.00142.42
M8TI24CADDY CLIP M8TI24
Flange 3 - 8mm / Studding M8
165.8610020.00132.69
M8TI58CADDY CLIP M8TI58
Flange 8 - 14mm / Studding M8
171.9410020.00137.55
M8TI912CADDY CLIP M8TI912
Flange 14 - 20mm / Studding M8
179.5310020.00143.62
T1024CADDY CLIP T1024
Flange 3 - 8mm / Hole 10.5mm
161.0210020.00128.82
T1058CADDY CLIP T1058
Flange 8 - 14mm / Hole 10.5mm
171.9410020.00137.55
T10912CADDY CLIP T10912
Flange 14 - 20mm / Hole 10.5mm
174.3010020.00139.44

Erico 812M24SM Range

A knock-on clip for horizontal girders with a lock shut clasp for pipe or conduit. Ths pipe holder will rotate 360 degrees.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
812M24SMCADDY CLIP 8/12M 24SM
Flange 3 - 8mm / Pipe 18 - 30mm
203.8710020.00163.10
812M58SMCADDY CLIP 8/12M 58SM
Flange 8 - 14mm / Pipe 18 - 30mm
203.8710020.00163.10
812M912SMCADDY CLIP 8/12M 912SM
Flange 14 - 20mm / Pipe 18 - 30mm
228.2210020.00182.58

Erico EM24 Range

A knock-on girder clip with a 6mm thread impression in the base. This clip can also be used for securing cable ties to girders.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
EM24CADDY CLIP EM24.
Flange 3 - 8mm.
92.8210020.0074.26
EM58CADDY CLIP EM58
Flange 8 - 14mm.
103.4710020.0082.78
EM912CADDY CLIP EM912
Flange 14 - 20mm
118.7010020.0094.96

Erico EM24SM Range

A knock-on girder clip that features an M6 stud 11mm long from the base.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
EM24SMCADDY CLIP EM24SM
Flange 3 - 8mm
165.8610020.00132.69
EM58SMCADDY CLIP EM58SM
Flange 8 - 14mm
179.5310020.00143.62
EM912SMCADDY CLIP EM912SM
Flange 14 - 20mm
197.8210020.00158.26

Erico Snap Clips

A range of knock-on girder clips designed to carry a single cable parallel to the edge of the girder. Three flange thicknesses available. For larger flanges please see the SCA and SCB adaptor clip.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
241011CADDY CLIP 24-10-11
Flange 2 - 4mm / Cable 10 - 11mm
18.2710020.0014.62
241214CADDY CLIP 24-12-14
Flange 2 - 4mm / Cable 12 - 14mm
18.2710020.0014.62
241518CADDY CLIP 24-15-18
Flange 2 - 4mm / Cable 15 - 18mm
21.3010020.0017.04
241924CADDY CLIP 24-19-24
Flange 2 - 4mm / Cable 19 - 24mm
25.8810020.0020.70
242530CADDY CLIP 24-25-30
Flange 2 - 4mm / Cable 25 - 30mm
31.9810020.0025.58
2467CADDY CLIP 24-6-7
Flange 2 - 4mm / Cable 6 - 7mm
16.7510020.0013.40
2478CADDY CLIP 24-7-8
Flange 2 - 4mm / Cable 7 - 8mm
16.7510020.0013.40
2489CADDT CLIP 24-8-9
Flange 2 - 4mm / Cable 8 - 9mm
16.7510020.0013.40
24910CADDY CLIP 24-9-10
Flange 2 - 4mm / Cable 9 - 10mm
16.7510020.0013.40
471011CADDY CLIP 47-10-11
Flange 4 - 7mm / Cable 10 - 11mm
18.2710020.0014.62
471214CADDY CLIP 47-12-14
Flange 4 - 7mm / Cable 12 - 14mm
18.2710020.0014.62
471518CADDY CLIP 47-15-18
Flange 4 - 7mm / Cable 15 - 18mm
21.3010020.0017.04
471924CADDY CLIP 47-19-24
Flange 4 - 7mm / Cable 19 - 24mm
25.8810020.0020.70
472530CADDY CLIP 47-25-30
Flange 4 - 7mm / Cable 25 - 30mm
31.9810020.0025.58
4767CADDY CLIP 47-6-7
Flange 4 - 7mm / Cable 6 - 7mm
16.7510020.0013.40
4778CADDY CLIP 47-7-8
Flange 4 - 7mm / Cable 7 - 8mm
16.7510020.0013.40
4789CADDY CLIP 47-8-9
Flange 4 - 7mm / Cable 8 - 9mm
16.7510020.0013.40
47910CADDY CLIP 47-9-10
Flange 4 - 7mm / Cable 9 - 10mm
16.7510020.0013.40
8121011CADDY CLIP 812-10-11
Flange 8 - 12mm / Cable 10 - 11mm
18.2710020.0014.62
8121214CADDY CLIP 812-12-14
Flange 8 - 12mm / Cable 12 - 14mm
18.2710020.0014.62
8121518CADDY CLIP 812-15-18
Flange 8 - 12mm / Cable 15 - 18mm
21.3010020.0017.04
8121924CADDY CLIP 812-19-24
Flange 8 - 12mm / Cable 19 - 24mm
25.8810020.0020.70
8122530CADDY CLIP 812-25-30
Flange 8 - 12mm / Cable 25 - 30mm
31.9810020.0025.58
81267CADDY CLIP 812-6-7
Flange 8 - 12mm / Cable 6 - 7mm
16.7510020.0013.40
81278CADDY CLIP 812-7-8
Flange 8 - 12mm / 7 - 8mm
16.7510020.0013.40
81289CADDY CLIP 812-8-9
Flange 8 - 12mm / Cable 8 - 9mm
16.7510020.0013.40
812910CADDY CLIP 812-09-10
Flange 8 - 12mm / Cable 9 - 10mm
16.7510020.0013.40

Erico SCA Snap Clip Adaptor

This adaptor will take up to 3 snap clips in the 2-4mm flange range, and enable them to be used on flanges 13 - 20mm.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
SCACADDY CLIP SCA
50.2310020.0040.18

Erico SCB Snap Clip Adaptor

These adaptors cover two flange ranges, and are designed for running multiple cables along a girder. Please use with the 2 - 4mm range snap clips.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
SCB1220CADDY CLIP SCB 1220
Flange 12 - 20mm
62.4110020.0049.93
SCB312CADDY CLIP SCB 312
Flange 3 - 12mm
60.8610020.0048.69

Erico EBC Beam Clamp

This bolt on beam clamp features three M6 thread impressions and a 10.5mm clearance hole through the back. Maximum flange size is 16mm.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
EBCCADDY CLIP EBC
142.0810020.00113.66

Erico EBC812M Beam Clamp

This bolt on beam clamp is for maximum beam thickness of 16mm. The pipe carrier will take pipe 18-30mm.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
EBC812MCADDY CLIP EBC 8/12M
288.6310020.00230.90

Erico EBC812MSM Beam Clamp

This bolt on clip is for maximum beam width of 16mm. The 18-30mm pipe clip is located on the side of the clip and will rotate 360 degrees.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
EBC812MSMCADDY CLIP EBC 812MSM
302.0710020.00241.66

Erico J1 Range

For use on vertical beams. Two flange thickness ranges are available.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
J1CADDY CLIP J1
Flange 1.5 - 4.0mm
63.9110020.0051.13
J2CADDY CLIP J2
Flange 4.0 - 6.5mm
66.9510020.0053.56

Erico M6TIJ1 Range

For use on vertical flanges, and incorporates a threaded rod holder. The rod holder can have a thread impression or clearance hole.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
M10TIJ1CADDY CLIP M10TI J1
Flange 1.5 - 4mm / Studding M10
168.4010020.00134.72
M10TIJ2CADDY CLIP M10TI J2
Flange 4 - 6.5mm / Studding M10
180.2110020.00144.17
M6TIJ1CADDY CLIP M6TIJ1
Flange 1.5 - 4mm / Studding M6
173.4610020.00138.77
M6TIJ2CADDY CLIP M6TIJ2
Flange 4 - 6.5mm / Studding M6
185.6210020.00148.50
M8TIJ1CADDY CLIP M8TIJ1
Flange 1.5 - 4mm / Studding M8
173.4610020.00138.77
M8TIJ2CADDY CLIP M8TIJ2
Flange 4 - 6.5mm / Studding M8
185.6210020.00148.50
T10J1CADDY CLIP T10J1
Flange 1.5 - 4mm / Hole 10.5mm
161.2810020.00129.02
T10J2CADDY CLIP T10J2
Flange 4 - 6.5mm / Hole 10.5mm
174.4510020.00139.56

Erico 122 Clip

For use in angled purlins. Will produce a 7mm hole.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
122CADDY CLIP 122
Flange 2.8mm Maximum
92.8210020.0074.26

Erico 122M6TI Range

This 122 clip is for use on angled purlins, and incorporates a threaded rod hanger. The rod hanger can have a thread impression or clearance hole.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
122M10TICADDY CLIP 122 M10TI
Flange 2.8mm Max / Studding M10
223.6810020.00178.94
122M6TICADDY CLIP 122 M6TI
Flange 2.8 Mm / Studding M6
235.8310020.00188.66
122M8TICADDY CLIP 122 M8TI
Flange 2.8mm Max / Studding M8
223.6810020.00178.94
122T10CADDY CLIP 122 T10
Flange 2.8mm Max / Hole 10.5mm
176.8210020.00141.46

Erico PW2 M6TI IN Range

This clip is for use on purlins with a return on the vertical section. The threaded rod carrier can have a thread impression or clearance hole.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
PW2M10TIINCADDY CLIP PW2M10TI IN
Studding M10
167.3710020.00133.90
PW2M6TIINCADDY CLIP PW2M6TI IN
Studding M6
167.3710020.00133.90
PW2M8TIINCADDY CLIP PW2M8TI IN
Studding M8
167.3710020.00133.90
PW2T10INCADDY CLIP PW2T10 IN
Hole 10.5mm
163.6310020.00130.90

Erico 812M Range

This range of pipe clips features a snap-shut gate to secure the pipe inside. There is a 7mm hole in the back of the clip.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
16MCADDY CLIP 16M
Pipe 30 - 35mm
133.9010020.00107.12
6MCADDY CLIP 6M
Pipe 14 -18mm
101.8810020.0081.50
812MCADDY CLIP 8/12M
Pipe 18 - 30mm
115.6310020.0092.50

Erico K12 Range

This range of clips is ideal for fixing a single tube to the side of a threaded rod. Quick and easy installation.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
K12CADDY CLIP K12
118.7010020.0094.96
K16CADDY CLIP K16
Suitable For M10 Stud With 20 Or 25MM Conduit
126.3110020.00101.05
K8CADDY CLIP K8
93.7210020.0074.98

Erico 4Z34 Range

Locates quickly and easily onto threaded rod and incorporates a 6mm thread impression. Two sizes available.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
4Z34CADDY CLIP 4Z34
Studding 4 - 8mm
48.7010020.0038.96
6Z34CADDY CLIP 6Z34
Studding 8 - 12mm
48.7010020.0038.96

Erico M6TI Range

Two ranges are available. The M6TIB range has a small angle bracket at the top to enable fixing to a ceiling. The M6TI range does not have this, and can be used to attach to a vertical surface.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
M10TICADDY CLIP M10TI
Studding M10
67.9610020.0054.37
M10TIBCADDY CLIP M10TIB
With Angle / Studding M10
205.3210020.00164.26
M6TICADDY CLIP M6TI
Studding M6
70.0010020.0056.00
M6TIBCADDY CLIP M6 TIB
With Angle / Studding M6
200.8210020.00160.66
M8TICADDY CLIP M8TI
Studding M8
66.9510020.0053.56
M8TIBCADDY CLIP M8TIB
With Angle / Studding M8
200.8210020.00160.66
T10CADDY CLIP T10
10.5mm Hole
93.8210020.0075.06
T10BCADDY CLIP T10B
10.5mm Hole
206.8410020.00165.47

Erico 4G16 Range

This clip twists easily onto suspended ceiling "T" bar to leave an M6 thread in varying lengths. Use with the 6WN washer nut.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
4G16M11CADDY CLIP 4G16 M11
25mm Tee / Stud 11mm
110.9310020.0088.74
4G16M16CADDY CLIP 4G16 M16
25mm Tee / Stud 16mm
113.9210020.0091.14
4G16M25CADDY CLIP 4G16 M25
25mm Tee / Stud 25mm
124.4510020.0099.56
4G16M38CADDY CLIP 4G16 M38
25mm Tee / Stud 38mm
137.9110020.00110.33
4G16M51CADDY CLIP 4G16 M51
25mm Tee / Stud 51mm
150.6810020.00120.54
4J15MCADDY CLIP 4J15M
15mm Tee / Stud 11mm
118.4310020.0094.74
6WNCADDY CLIP 6WN
43.4910020.0034.79

Erico GTD Range

Two sizes of clip for use into profiled steel decking. The clip can have a thread impression or clearance hole.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
M10GTD1217CADDY CLIP M10GTD 1217
Studding M10
85.6710020.0068.54
M10GTD1722CADDY CLIP M10GTD 1722
Studding M10
92.9210020.0074.34
M6GTD1217CADDY CLIP M6GTD 1217
Studding M6
79.3910020.0063.51
M6GTD1722CADDY CLIP M6GTD 1722
Studding M6
86.1210020.0068.90
M8GTD1217CADDY CLIP M8GTD1217
Studding M8
82.5710020.0066.06
M8GTD1722CADDY CLIP M8GTD1722
Studding M8
82.5710020.0066.06

Erico SCD Range

These two clips are for use into steel profiled decking. Two sizes are available to suit most deckings. Please use with the 2-4mm range of snap clip.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
SCD1217CADDY CLIP SCD 1217
74.5710020.0059.66
SCD1722CADDY CLIP SCD 1722
74.5710020.0059.66

Erico DFF Hanger

This useful clip is a quick and easy way to suspend flourescent fittings on either chain or wire.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
DFF11ERICO CADDY DFF1/1
70.1810020.0056.14

Erico TSGB Bracket

TSGB brackets are designed for use in stud walls as a quick and easy support method for electrical boxes.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
TSGB16CADDY CLIP TSGB 16
ERICO 187190
135.8710020.00108.70
TSGB24CADDY CLIP TSGB 24
ERICO 187191
148.2110020.00118.57

Erico C16EC Range

This range is for clamping tube to the underside of Unistrut style channel.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
C16ECERICO C-EC CLAMP
12MM-16MM
107.0310020.0085.62
C20ECERICO C-EC CLAMP
16MM-20MM
116.4610020.0093.17
C24ECERICO C-EC CLAMP
20MM-24MM
124.3310020.0099.46
C28ECERICO C-EC CLAMP
24MM-28MM
138.5010020.00110.80
C40ECERICO C-EC CLAMP
36MM-40MM
190.7010020.00152.56

Erico C16EU Range

This range of clip is designed for securing tube to the underside of a flange. The maximum thickness of the flange is 12mm.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
C16EUERICO C-EC CLAMP
12MM-16MM
107.4610020.0085.97
C20EUCADDY CLIP C20 EU
108.9910020.0087.19
C24EUCADDY CLIP C24 EU
119.5710020.0095.66
C28EUCADI PIPE CLAMP C28 EU
24 - 28mm
127.1510020.00101.72

Erico Swivel Hanger

This swivel has a female thread/male thread on each end. The maximum deflection possible is 15 degrees.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
SWIV0850SWIVEL CONNECTOR Z/P
8x50mm
224.7610020.00179.81
SWIV1070SWIVEL CONNECTOR Z/P
10x70mm
328.8310020.00263.06
SWIV1295SWIVEL CONNECTOR Z/P
12x95mm
345.4910020.00276.39

Erico Thread Reducers

The RFF range is Female/Female. The RMF range is Male/Female.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
RFF0810STUD REDUCER M10-M8
8mm Female / 10mm Female
141.5610020.00113.25
RFF0812STUD REDUCER FEMALE/FEMALE
8mm Female / 12mm Female
141.5610020.00113.25
RFF1012STUD REDUCER FEMALE/FEMALE
10mm Female / 12mm Female
141.5610020.00113.25
RMF0608CADDY REDUCER 06F-08M
6mm Female / 8mm Male
72.8410020.0058.27
RMF0806CADDY REDUCER 08F-06M
8mm Female / 6mm Male
72.8410020.0058.27
RMF0810CADDY REDUCER 8F-10M
8mm Female / 10mm Male
72.8410020.0058.27
RMF0812CADDY REDUCER 8F-12M
8mm Female / 12mm Male
72.8410020.0058.27
RMF1008CADDY REDUCER 10F-08M
10mm Female / 8mm Male
72.8410020.0058.27
RMF1012CADDY REDUCER 10F-12M
10mm Female / 12mm Male
72.8410020.0058.27
RMF1208CADDY REDUCER 12F-08M
12mm Female / 8mm Male
72.8410020.0058.27
RMF1210CADDY REDUCER 12F-10M
12mm Female / 10mm Male
118.6410020.0094.91

Erico Big Mouth Beam Clamp

This clamp is similar to our CBC10 beam clamp, but due to the elongated body will fit onto flanges up to 30mm thick.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
CBC10BM10mm "C" BEAM CLAMP BIG
MOUTH 31.8mm BTKM10
444.4510020.00355.56

Cable Tray Stand-Off Bracket

The stand-off height on all brackets is 25mm. Finish Zinc Plated.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
CTSOB1C/TRAY STAND OFF BRACKET
50-75mm
1.73120.001.38
CTSOB2C/TRAY STAND OFF BRACKET
100-150mm
1.96120.001.57
CTSOB3C/TRAY STAND OFF BRACKET
225mm
2.77120.002.22
CTSOB4C/TRAY STAND OFF BRACKET
300mm
3.92120.003.14

Erico Speedlink 1.5mm

1.5mm diameter wire complete with reversible grip in five useful lengths. SWL is 20kg with 5:1 safety factor.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
SLD15L1ERICO SPEEDLINK LD 1mtr
3.35120.002.68
SLD15L10ERICO SPEEDLINK LD 10mtr
6.86120.005.49
SLD15L2ERICO SPEEDLINK LD 2mtr
3.72120.002.98
SLD15L3ERICO SPEEDLINK LD 3mtr
4.00120.003.20
SLD15L5ERICO SPEEDLINK LD 5mtr
4.77120.003.82

Erico Pyramid 'ST' 254mm Long

The pyramid range is designed for use on flat roofs to support cable trays and pipes without damaging the roof membraine. Two heights of 100mm and 150mm are available.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
PYRST104PYRAMID ST SUPPORT.
254 X 203 X 100mm.
17.28120.0013.82
PYRST106PYRAMID ST SUPPORT.
254 X 203 X 150mm.
21.12120.0016.90

Erico Pyramid 'ST' 406mm Long

The pyramid range is designed for use on flat roofs to support cable trays and pipes without damaging the roof membraine. Two heights of 100mm and 150mm are available.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
PYRST164PYRAMID ST SUPPORT.
406 X 203 X 100mm.
33.72120.0026.98
PYRST166PYRAMID ST SUPPORT
406 X 203 X 150mm.
41.51120.0033.21

Erico Pyramid 'H' Base

The pyramid 'H' base is designed to accomodate a 41X41 Unistrut channel vertically. The 'H' base can be used as a support foot or in pairs to construct a supporting 'H' frame. All channel and fixings should be ordered separately.
Product CodeProductList ££/PerDisc. %Nett £/UnitQTY
PYRHBASEPYRAMID H SUPPORT BASE.
314 X 314 X 117mm.
27.75120.0022.20



Warning: Division by zero in /var/webroot/customer_custom/hobbyhomes.com/cart.php on line 52

Warning: Division by zero in /var/webroot/customer_custom/hobbyhomes.com/cart.php on line 52

Warning: Division by zero in /var/webroot/customer_custom/hobbyhomes.com/cart.php on line 52

Items: 3
Net Total: 0.00
VAT(20%): 0.00
Total Incl. VAT: 0.00



List Price Look-Up

 


 
Our Latest Catalogue